TX buffer overflow

In the first post of the Speaking CAN series, we learned how the terminal sends a read-parameter request to the ECU and how the ECU sends a response with the value of the parameter back to the terminal. This works fine, as long as the terminal does not send too many requests too fast.

We set the size txqueuelen of the write or TX buffer to 10, which is the default for many Yocto-based Linux systems. If the terminal writes, say, 50 requests to the CAN bus without any pause, we’ll see several error messages No buffer space available in the log window of the terminal. The terminal caused an overflow of the write buffer in the CAN controller.

If we have a request-and-response scenario, the terminal can wait for the response, before it sends the next request. If the response does not arrive within a certain time, the terminal flags an error.

Avoiding a write buffer overflow becomes more difficult, if the terminal sends out messages without expecting a response or if the terminal expects a response only every, say, 200 messages (e.g., an acknowledgement how many messages the ECU has received). The solution is to configure the CAN controller of the terminal to receive its own messages.